1,782 Royalty-Free Audio Tracks for "High And Low"

I recorded myself making ringing feedback noise with my guitar through a valve amp, plus some wah.

Recording of a pinging bottle.

Paper ripping, quick, high-pitched.

Recording of glass cups being played by rubbing a finger along their tops. The sound is a high, resonant drone. Several different glasses are used, so more than one pitch is heard. The recording is of middling quality, and background noise is audible throughout.

Field recording made of my tesla coil in cambridge 2016.

Punchy skrillex snare.

A modulated high frequency synth created using eq and vol automation un-filtered.

Running finger along the rim of a wineglass, producing a c#. Starts with a slow build, and ends abruptly when the glass is silenced by grabbing it. Recorded with zoom h4n, built-in mics.

Exclusive for minimal ;).

High frequencies repeted sound (sound design in protools).

A sparkly sound experiment i created using audacity.

A one minute, short soundwalk around the bergen building's parking lot. Walking from the entrance of the building and going to the left and then along the parking lot entrance.

A narrated sound walk at loyola high schools bergin building parking lot. Starting at the door to the building and then going along the entranced of the parking lot at the left side of the lot.

I was court side on an outdoor park listening to people playing basketball. I also added some quiet effects in the background to add more.

Accordion high pitch filtered and slowed down.

Accordion studio recording, high pitch tremolo.

Accordion high pitch filtered tremolo.

Accordion high pitch band filtered, remixed, slowed down.

Accordion band filtered short sound remix creating a high pitch attack.

Sonido que simula el caminar de un insecto.

Recorded on audacity. Edited on osu.

A beaded necklace jingling on a wooden table.

Sound of balinese chimes recorded with tascam dr-60 d mkii linear recorder and pair of akg p120 electret condenser microphones on a stagg smc3 3m xlr cable. Knobs of sensitivity were turned in position of highest sensitivity. Microphones were configured as stereo pair and placed face to face in front of each other in distance of 75cm. Microphones placed on stands. Chimes was held in the hand between mics along the way of sight of them, with smallest bell on the side of right microphone. Recorded afternoon in a bedroom with closed door and windows in a house next to high street. Recorded in 96khz and 24bit. Trimmed and normalized in flstudio edison. Normalization made sample 32bit.

This is my recording of a buzz saw sawing with high, metallic screaming.

Random synth sound.

A collection of sounds loosely defined as high hats. Short, filtered noise bursts would be more accurate.

Just some mouse clicks on a logitech wireless mouse.

Sound of some kids giving me high fives.

Snow storm, snow gliding on snow, wind blow and occasionnal rustling.

I stood under the transmission lines with my olympus ls-7 recorder in nw ohio to get the sound. According to a map i found online, the lines are indeed 765,000 volts phase to phase, four lines bundled for each phase.

A low quality breaking sound, made from a high-pitched beep (i forgot how), then slowing down the result.

A sounds made with a microwave. High pitched sound looped 15 times. Enjoy!.

Recorded in a tram in tokyo. I didn't use high-pass filter when recorded, so i think you can hear much low frequency. Sennheiser mkh20 and fostex fr-2.

This is a remix of a high bell. After some complex filtering and re-pitching, here it is!.

A low frequency hum that will work on pc speakers (at least it does on my pc). . - i made this sound because i needed a deep hum for a composition, but as it turned out my pc speakers cut off low frequencies. A quick googling taught me that this is common for many pc's, but also that there might be ways around it in terms of designing waves that the speakers can produce. And so, after playing around with audacity abit, i came up with this low frequency hum that works well for my purpose at least. - i hope it might help others with similar issues.

This a direct sound of an air conditioner with a bit of a metallic rattle, feel free to use on anything.

This is a remix of a high bell. After some complex filtering and re-pitching, here it is! this bell is tuned to a#.

The crackling of a high-voltage ac line, recorded from the foot of a transmission tower. A few birds and dogs can be heard in the background. Recorded by me on a tascam dr-05, 16bits, 44. 1khz.

Central heating boiler switching on and working for about 4 mins,recorded from the 5th floor of my appartment with sennheiser mkh-416, shure fp 33 mixer into a mz-r410 mini disc. Very low frequency recorded in high levels,two maybe three different mic placements,enjoy. . .

Snare tuned e. I've created it with rob papen punch software synthesizer & saturated in tapey style. It's not very fat 'cause the fundamental tone is above 300hz & it's "low-cutted" by fabfilter eq. .

Deep acid sound, processed kick drum with low-pass filter, high resonance.

Constant flame burner, very low and large frequency specs, used to melt asphalt recorded at 48-16 with portable dat using schoeps ms ball, edited and decoded in stereo in pt.

This sample is all synthetic. It is a low rumble.

A quick responsive bass sound.

- recorded using the roland r-05 field recorder. - captured whilst passenger-driver. - low organic hum texture.

Low-fi transmilenio bogotá.